Compressive buttress compared with off-axial screw fixation for vertical femoral neck fractures in young adults: a prospective, randomized controlled trial.

BACKGROUND: To compare the clinical outcomes of compressive buttress screw (CBS) fixation, a novel screw fixation strategy, to off-axial screw fixation (off-axial partial threaded cannulated screw, OPTCS) for vertical femoral neck fractures (FNFs) in young adults. METHODS: A total of 146 adults younger than 55 years old with high-energy Pauwels type III FNFs were randomized to receive CBS fixation or OPTCS fixation. Primary outcomes were complication rates, including fixation failure, fracture nonunion, and avascular necrosis of the femoral head (ANFH) at 24 months after treatment. Fixation loosening, femoral neck shortening and varus collapse, patient function and quality of life using the Harris hip score (HHS), and EuroQol-5 dimensional-5 levels (EQ-5D-5L) questionnaire (including EQ-5D-5L and EQ-VAS) were assessed as secondary outcomes at 24 months. RESULTS: CBS and OPTCS fixation groups were similar with regard to demographics at baseline. At 24 months, patients in the CBS fixation cohort had a significantly lower rate of fixation failure (10.5% vs. 25.0%, p = 0.041) and fracture nonunion (1.8% vs. 18.3%, p = 0.003) compared with patients who received OPTCS fixation. There was no difference in rate of ANFH (7.0% vs. 11.7%, p = 0.389) between groups. Additionally, patients managed with CBS fixation showed significantly less fixation loosening (19.3% vs. 58.3%, p < 0.001), less severe femoral neck shortening and varus collapse (10.5% vs. 25.0%, p = 0.007), higher HHS (93 vs. 83, p = 0.001) and more excellent grade (68.4% vs. 36.7%, p = 0.008), higher EQ-5D-5L (0.814 vs, 0.581, p < 0.001) and EQ-VAS (85 vs. 80, p = 0.002). CONCLUSION: CBS screw fixation confers significantly lower complication rate in addition to higher functional and quality of life outcomes for young adults with high-energy FNF compared with OPTCS fixation. TRIAL REGISTRATION: This prospective, randomized controlled trial was approved by the institutional review board of our center, Ethics Committee of Shanghai sixth people's Hospital, and registered at www.chictr.org.cn (Approval Number: ChiCTR1900026283; Registered 29 September 2019-Retrospectively registered, https://www.chictr.org.cn/showproj.html?proj=43164 ).

In vitro inhalation bioaccessibility and health risk assessment of difenoconazole in the atmosphere.

BACKGROUND: Assessment of the risk of pesticide inhalation in populations around farmland is necessary because inhalation is one of the ways in which pesticides can risk human health. This study aimed to identify the inhalation risk of difenoconazole on humans by using dose-response and exposure assessments. RESULTS: In the field simulation application, respiratory exposure in populations around farmland ranged from 71 to 430 ng/m3 . Using response surface methodology, the maximum bioaccessibility of difenoconazole in three simulated lung fluids was 35.33% in Gamble's solution (GS), 34.12% in artificial lysosomal fluid (ALF), and 42.06% in simulated interstitial lung fluid (SLF). Taking the proliferation activity of the A549 cell model as the endpoint, the benchmark dose limit and benchmark dose of difenoconazole on A549 cells were 16.36 and 5.60 mg/kg, respectively. The margin of exposure to difenoconazole in GS, ALF and SLF were, respectively, 8.66 × 105 to 5.28 × 106 , 8.97 × 105 to 5.47 × 106 and 7.28 × 105 to 4.44 × 106 . CONCLUSION: The risk assessment results indicate that under all circumstances, applying difenoconazole is safe for populations around farmland. However, a fan-shaped nozzle, suspension concentrate and greater inhalation height increase the risk of inhalation. © 2023 Society of Chemical Industry.

Biomechanical evaluation of compression buttress screw and medial plate fixation for the treatment of vertical femoral neck fractures.

OBJECTIVE: To compare the biomechanical properties of compression buttress screw (CBS) fixation with three plate fixation methods for the treatment of vertical femoral neck fractures (FNFs). METHODS: A total of forty synthetic femoral models with simulated Pauwels type III fractures (angle of 70°) were equally assigned to one of four fixation groups: CBS fixation, anteromedial plate fixation (AMP), medial buttress plate fixation (MBP) and medial buttress plate fixation without proximal screw (MBPw). Within each group, half of the specimens were randomly assigned to two loading settings, an axial compression loading test and a hip-flexion torsion test. RESULTS: There were no significant differences in axial load to failure, axial stiffness, torsional strength, or torsional stiffness when comparing CBS with MBP (p>0.05). In the axial compression loading test, both CBS and MBP showed higher load to failure and axial stiffness than MBPw (p<0.05). In torsional testing, AMP exhibited superior torsional strength and torsional stiffness than both MBPw and MBP (all p<0.05) and a higher torsional strength than CBS fixation (p<0.05). There were no significant differences in torsional stiffness between the CBS and AMP fixation groups (p>0.05). CONCLUSION: The biomechanical parameters of CBS fixation are comparable to that of AMP and MBP, and demonstrate superior axial stiffness than MBPw fixation. Although the CBS method for surgical fixation of vertical FNF holds promise as a less invasive surgical technique than plate fixation with similar biomechanical assessments, further clinical evaluation is warranted.

Roles of extra-cellular signal-regulated protein kinase 5 signaling pathway in the development of spinal cord injury.

BACKGROUND: In consideration of characteristics and functions, extra-cellular signal-regulated protein kinase 5 (ERK5) signaling pathway could be a new target for spinal cord injury (SCI) treatment. Our study aimed to evaluate the roles of ERK5 signaling pathway in secondary damage of SCI. METHODS: We randomly divided 70 healthy Wistar rats into five groups: ten in the blank group, 15 in the sham surgery + BIX02188 (sham + B) group, 15 in the sham surgery + dimethyl sulfoxide (DMSO; sham + D) group, 15 in the SCI + BIX02188 (SCI + B) group, and 15 in the SCI + DMSO (SCI + D) group. BIX02188 is a specific inhibitor of the ERK5 signaling pathway. SCI was induced by the application of vascular clips (with the force of 30 g) to the dura on T10 level, while rats in the sham surgery group underwent only T9-T11 laminectomy. BIX02188 or DMSO was intra-thecally injected at 1, 6, and 12 h after surgery or SCI. Spinal cord samples were taken for testing at 24 h after surgery or SCI. RESULTS: Expression of phosphorylated-ERK5 (p-ERK5) significantly increased after SCI. Application of BIX02188 indeed inhibited ERK5 signaling pathway and reduced the degree of spinal cord tissue injury, neutrophil infiltration and proinflammatory cytokine expression, nuclear factor-κB (NF-κB) activation and apoptosis (measured by TdT-mediated 2'-deoxyuridine 5'-triphosphate nick-end labeling, expression of Fas-ligand, BCL2-associated X [Bax], and B-cell lymphoma-2 [Bcl-2]). Double immunofluorescence revealed activation of ERK5 in neurons and microglia after SCI. CONCLUSION: ERK5 signaling pathway was activated in spinal neurons and microglia, contributing to secondary injury of SCI. Moreover, inhibition of ERK5 signaling pathway could alleviate the degree of SCI, which might be related to its regulation of infiltration of inflammatory cells and release of inflammatory cytokines, expression of NF-κB and cell apoptosis.

Biomechanical effect of bone resorption of the spinous process after single-segment interspinous dynamic stabilization device implantation: A finite element analysis.

This study aims to explore the influence of bone resorption of the spinous process after single-segment interspinous process device (IPD) implantation on the biomechanics of the lumbar spine.The 3D finite element model of the lumbar spine (L3-L5) was modified, and 2 models that simulated the presence and absence of bone resorption of the spinous process were developed using an IPD (Wallis). Its biomechanical effects, such as change in range of motion (ROM) and intervertebral disc and facet stress, were introduced at operative (L4/5) and adjacent (L3/4) levels.Compared with the INT model, the Wallis model and Wallis-BR model had similar ROMs in lateral flexion and rotation. However, the Wallis model had a lower L3-5 ROM in flexion (20.4% lower) and extension (26.4% lower), and L4-L5 ROM in flexion (74.1% lower) and extension (70.8% lower), while the overall ROM of the Wallis-BR model was greater than that of the Wallis model. The stress on the L3/L4 intervertebral disc and facets was similar for all 3 models. Compared with the INT model and Wallis-BR model, the stress on the L4/L5 intervertebral disc and facets under all movements significantly decreased in the Wallis model. The stress on the L5 process was greater than that on the L4 process in both the Wallis model and Wallis-BR model, and the load on the processes that underwent bone resorption was lower than that of the Wallis model.The function of the IPD slowly decreased with the occurrence of bone resorption of the interspinous process. This bone remodeling may be associated with high stress after IPD implantation.

Clinical and Radiologic Features of 3 Reconstructive Procedures for the Surgical Management of Patients with Bilevel Cervical Degenerative Disc Disease at a Minimum Follow-Up Period of 5 Years: A Comparative Study.

OBJECTIVE: To assess the mid-long-term follow-up of the safety and efficacy of anterior cervical discectomy and fusion (ACDF), cervical artificial disc replacement (CADR) and hybrid surgery (HS) for bilevel cervical degenerative disc disease (cDDD). METHODS: 77 patients who underwent ACDF, HS, and CADR were retrospectively reviewed. Clinical effects were evaluated based on Neck Disability Index (NDI), Visual Analog Scale (VAS), and Japanese Orthopedic Association (JOA) scores and the Odom criteria. Radiographic outcomes were evaluated, including cervical range of motion (ROM), ROM in the operative and adjacent segments, incidence of degeneration in the adjacent segments (ASD), and heterotopic ossification (HO). RESULTS: NDI, VAS, and JOA scores significantly improved in all patients after surgery without significant differences between groups. The excellent-to-good ratio in the Odom scale was 28/30 for the HS group, 30/33 for the ACDF group, and 13/14 for the CADR group. No significant differences in clinical outcomes or complication were found between groups (P > 0.05). Furthermore, the HS and CADR groups had less decreased ROM in the cervical and operative segments and less compensatory ROM in adjacent segments (P < 0.05). By contrast, the ACDF group had decreased ROM in the cervical and operative segments and significantly increased ROM in adjacent segments (P < 0.05). Moreover, the incidence of ASD was higher in the ACDF group, but the difference was not statistically significant (P > 0.05). HO was found in 10 patients (33.3%) in the HS group and 5 patients (35.7%) in the CADR group. CONCLUSION: HS was superior to ACDF with regard to equivalent clinical outcomes in the mid-long-term follow-up. Furthermore, HS was superior in the maintenance of ROM and had less impact on its adjacent segments. The efficacy of HS is similar to that of CADR.

Radiological Analysis of Thoracolumbar Junctional Degenerative Kyphosis in Patients with Lumbar Degenerative Kyphosis.

BACKGROUND: Thoracolumbar junction (TLJ) is the transitional area between the lower thoracic spine and the upper lumbar spine. Vertebral compression fractures and proximal junctional kyphosis following spine surgery often occur in this area. Therefore, the study of development and mechanisms of thoracolumbar junctional degeneration is important for planning surgical management. This study aimed to review radiological parameters of thoracolumbar junctional degenerative kyphosis (TLJDK) in patients with lumbar degenerative kyphosis and to analyze compensatory mechanisms of sagittal balance. METHODS: From January 2016 to March 2017, patients with lumbar degenerative kyphosis were enrolled in this radiographic study. Patients were divided into two groups according to thoracolumbar junctional angle (TLJA): the non-TLJDK (NTLJDK) group (TLJA <10°) and the TLJDK group (TLJA ≥10°). Complete spinopelvic radiographic parameters were analyzed and compared between two groups. Pearson or Spearman correlation coefficients and independent two-sample t-test or Mann-Whitney U-test were used. RESULTS: A total of 77 patients with symptomatic sagittal imbalance due to lumbar degenerative kyphosis were enrolled in this study. There were 34 patients in NTLJDK group (TLJA <10°) and 43 patients in TLJDK group (TLJA ≥10°). The median angle of lumbar lordosis (LL) in the NTLJDK or TLJDK groups was 23.40° (18.50°, 29.48°) or 19.50° (13.30°, 24.55°), respectively. The median TLJAs in all patients and both groups were -11.20° (-14.60°, -4.80°), -3.70° (-7.53°, -1.73°), and -14.30° (-17.45°, -13.00°), respectively. In the NTLJDK group, LL was correlated with thoracic kyphosis (TK; r = -0.400, P = 0.019), sacral slope (SS; r = 0.681, P < 0.001), and C7-sagittal vertical axis (r = -0.402, P = 0.018). In the TLJDK group, LL was correlated with TK (r = -0.345, P = 0.024), SS (r = 0.595, P < 0.001), and pelvic tilt (r = -0.363, P = 0.017). There were significant differences in LL, TLJA, TK, SS, and pelvic incidence (PI) between two groups. CONCLUSIONS: Although TLJDK is common in patients with lumbar degenerative kyphosis, it might be generated by special characteristics of morphology and biomechanics of the TLJ. To maintain sagittal balance, pelvis back tilt might be more important in patients with TLJDK, whereas thoracic curve changes might be more important in patients without TLJDK.